Colorado Midland Railway
| Colorado Midland | |
|---|---|
| |
| Locale | Colorado |
| Dates of operation | 1883 – 1918 |
| Track gauge | 4 ft 8½ in (1435 mm) (standard gauge) |
| Headquarters | |
The Colorado Midland Railway, incorporated in 1883, was the first standard gauge railroad built over the Continental Divide in Colorado. It ran from Colorado Springs to Leadville and through the divide at Hagerman Pass to Aspen and Grand Junction. Later the line was extended eleven miles (17.7 km) west of Grand Junction to New Castle.
John J. Hagerman gained control of the Colorado Midland Railway Company in June 1885. Hagerman sold the railroad to the Atchison, Topeka and Santa Fe Railway (ATSF) in September 1890; ATSF operated the railroad as a subsidiary and changed the name to the Colorado Midland Railroad.
The Hagerman Tunnel was completed through the divide in 1887. In 1891 it was replaced by the Busk-Ivanhoe Tunnel which was at a lower altitude. This shortened the line and made the grade easier.
For a short time the railroad was consolidated with the Aspen Short Line (1893-1897) and with the Denver and Rio Grande Railroad owned by the Rio Grande Junction Railway. After the company was sold through the bankruptcy court on May 4 1897, a new company known as the Colorado Midland Railway took over operation of the railroad.
The Colorado Midland Railway, came first under the control of the Atchison, Topeka and Santa Fe Railway in 1890, later the Colorado & Southern Railway and the Denver and Rio Grande Railroad in 1900. It again declared bankruptcy April 21 1917, and was sold at auction to Albert E. Carlton of Colorado Springs. Carlton attempted to revive the railroad's fortunes, but his stewardship of the road coincided with the entry of the United States into the First World War. After the inauguration of the US Railroad Administration in late 1917, the government managers redirected much of the trans-Colorado traffic that was previously carried by other railroads onto the Midland, which was ill-equipped to deal with the sudden upturn in business. The traffic overwhelmed the railroad, and when it became apparent that the Midland was incapable of dealing with the volume of business, the government redirected all of it elsewhere. Business dropped off precipitately, and Carleton was forced to apply for permission to abandon operations. He received it, and the Colorado Midland Railway ceased operations in 1918. Segments of the railroad were then sold to the Midland Terminal Railroad; the rest of the line, mostly west of the Midland Terminal connection at Divide, was abandoned. The line was scrapped in the early 1920s.
Topography and Operations
The Midland (as it was colloquially known) was an extraordinarily difficult railroad to operate, in large part because it had very little level track. In crossing Colorado, the line made three summits - at Hayden Divide, west of Colorado Springs, at Trout Creek Pass, and at Hagerman Pass on the Continental Divide. The approaches to these summits were severe: eastbound trains faced an ascent of about twenty miles of three percent grades in the climb from Basalt to the western portal of the tunnel at Ivanhoe; westbound trains climbing out of the Arkansas River Valley faced a shorter but still difficult climb of 3.24%. Even after the boring of the Busk-Ivanhoe Tunnel, much of this trackage was above nine thousand feet, in a district of Colorado where the snow often does not melt entirely until June. The railroad was difficult to operate at the best of times, and in winter it was often nearly impossible: the 1899 blizzard closed the line over Hagerman Pass for 77 days and cost the company more than $73,000. The ascent from Colorado Springs to Divide was also severe, with several stretches of 4% grade and significant curvature.
As great a problem as topography was, the route and terminals posed a still greater one. The line was originally projected to connect Colorado Springs, Leadville, and Salt Lake City, Utah, but it eventually stopped at Grand Junction, Colorado. If the line had been extended to Salt Lake City it would have had access to connections with the Union Pacific and Southern Pacific at Ogden, but at Grand Junction, it connected only with the Denver & Rio Grande, its principal competitor for traffic at Leadville and Colorado Springs. While the Midland had no choice but to turn over westbound traffic to the D&RGW at Grand Junction, the competing line had no such incentive; it could move eastbound traffic over its own line to any spot the Midland served. When A.E. Carleton bought the CM, he planned to remedy this situation by extending the railroad across Utah to Salt Lake City, but he was unable to do so, relying instead on his business connections to obtain cars consigned for shipment east at Grand Junction. Ironically, the situation reversed itself abruptly after the government took control of the railroads, and the USRA decided to route all trans-Colorado traffic onto the Midland. The railroad suddenly found itself handling a swelling volume of interchange traffic at Colorado Springs and Grand Junction. The line had neither the motive power nor the physical facilities to deal with this sudden change, and yards and even on-line sidings rapidly filled with cars waiting movement to one of the terminals. After an investigation, the government reversed its decision, redirecting through traffic to neighboring lines that were more capable of handling it; this was a wise decision, but the business generated by the road's on-line customers was not sufficient to keep it profitable without through traffic, and Carleton was compelled to seek permission from a court to abandon service in the summer of 1918.
Equipment
At the time of its construction, the Midland was among the best-appointed roads in the United States. Ten of the locomotives it purchased in 1886 and 1887 (the Class 115 2-8-0s) were among the largest and most powerful of their type in the United States. Unfortunately, the Midland's cash situation militated against capital replacement, and most of the locomotives purchased in the road's first decade were still on the property when it closed in 1918. The Midland purchased its last locomotives, the Class 175 2-8-0s, in 1907; after that, the purchase of new power fell behind ordinary operations and maintenance expenses on the company's priority list, and was postponed in part because of concerns about the ability of the roadbed and track to support heavier equipment. At the outbreak of the First World War, the road's chief mechanical officer proposed the immediate construction of a new class of engines to handle the surging traffic, but the state of the road's physical plant (which urgently needed both maintenance and upgrading) was such that he limited his proposal to a copy of the D&RGW's C-48 class locomotives, a design that was Thirteen years old and approaching obsolescence.
